The synchronisation system for Push-open Progressa runners has been developed to ensure that drawers of any width can be opened with minimum effort.
The system links the two runners, which thus become a single element; a pressure at any point of the drawer front (even at the extremities), is sufficient for the Push mechanism to release and consequently for the drawer to self-open.
It is recommended for drawers over 80 cm in width.
Designed for use with all sizes of:
- Progressa Push (except 250mm and 300mm lengths)
- Progressa+ Push
- Progressa+ Shelf Push
In the box:
- 1 stabiliser Bar (1150mm long)
- 2 driver pins
- 1 right carrier plate
- 1 left carrier plate
Technical Details:
- Minimum internal cabinet width = 280mm
- Maximum internal cabinet width = 1305mm
- Supplied bar length 1150mm, simply cut to size
- 76mm grove in the rear of the drawer required
-
Use of bumpers not recommended for the correct operation of Push mechanism when the drawer front is pressed
Progressa Technical InformationThe synchronisation system for Push-open Progressa runners has been developed to ensure that drawers of any width can be opened with minimum effort.
The system links the two runners, which thus become a single element; a pressure at any point of the drawer front (even at the extremities), is sufficient for the Push mechanism to release and consequently for the drawer to self-open.
It is recommended for drawers over 80 cm in width.
Designed for use with all sizes of:
- Progressa Push (except 250mm and 300mm lengths)
- Progressa+ Push
- Progressa+ Shelf Push
In the box:
- 1 stabiliser Bar (1150mm long)
- 2 driver pins
- 1 right carrier plate
- 1 left carrier plate
Technical Details:
- Minimum internal cabinet width = 280mm
- Maximum internal cabinet width = 1305mm
- Supplied bar length 1150mm, simply cut to size
- 76mm grove in the rear of the drawer required
-
Use of bumpers not recommended for the correct operation of Push mechanism when the drawer front is pressed